Document Type : Original Article

Authors

1 MSc in Occupational Health, Occupational Health Department, Health Faculty, Qom University of Medical Sciences, Yazd, Iran

2 Assistant Professor of Occupational Health, Department of Occupational Health, School of Health and Nutrition, Shiraz University of Medical Sciences, Shiraz, Iran.

3 Associate Professor in Occupational Health, Occupational Health Department, Health Faculty, Qom University of Medical Sciences, Qom, Iran

4 MSc in Occupational Health, Health & Medicine Department, PIHO (petroleum industry health organization), Isfahan, Iran

5 Professor in Occupational Health, Occupational Health Department, Health Faculty, Yazd University of Medical Sciences, Yazd, Iran

6 PHD candidate, Occupational Health Department, School of Health, Shiraz University of Medical Sciences, Shiraz, Iran,

Abstract

Background: Crystalline silica is one of the compounds used in different industries. One of the industries in which this compound is used is the tile industry that can cause disabling lung disease. The purpose of this study was to reduce and eliminate workplace air pollutants by Local Exhaust Ventilation system (LEVs).
 Methods: In this interventional-practical study, designing LEVs is accomplished according to the velocity pressure method balanced system design of the American Conference of Governmental Industrial Hygienists (ACGIH) and is performed in spray dryer hall in a tile factory. The studied population consisted of 22 workers selected randomly. After implementation, the LEVs efficiency was evaluated, both in terms of occupational health and fluid mechanics. In order to evaluate the system from the point of view of occupational health, the measurement of Crystalline silica, inhalable and total dust was done before and after installation of LEVs by the National Institute of Occupational Safety and Health (NIOSH) 7601, 0600 and open face methods, respectively; also, to evaluate the system as to fluid mechanics, we measured the velocity and flow rate in some hoods and ducts.
 Results: Results showed that the obtained mean values of total, inhalable and silica dust after installation of LEVs had a statistically significant difference before the use of LEVs (p<0.05); also, the efficiency of removing the mentioned pollutants was 66, 94 and 96%, respectively.
 Conclusion:  The performance of the ventilation system was in accordance with the values obtained in the design.

Keywords

  1. Bang KM, Mazurek JM, Wood JM, White GE, Hendricks SA, Weston A. Silicosis mortality trends and new exposures to respirable crystalline silica—United States, 2001–2010. MMWR Morbidity and mortality weekly report. 2015;64(5):117-120.
  2. M't KS, Attfield M, Boffetta P, Checkoway H, DeKlerk N, Koskela R. Exposure-response analysis and risk assessment for silica and silicosis mortality in a pooled analysis of six cohorts. Occupational and environmental medicine. 2002;59(11):723
  3. Steenland K, Ward E (2014)Silica: a lung carcinogen. CA: A Cancer Journal for Clinicians, 64(1):63-9.
  4. Koskela RS, Klockars M, Laurent H, Holopainen M (1994) Silica dust exposure and lung cancer. Scandinavian Journal of Work, Environment & Health, 20: 407-16.
  5. Liu Y, Steenland K, Rong Y, Hnizdo E, Huang X, Zhang H, (2013)Exposure-response analysis and risk assessment for lung cancer in relationship to silica exposure: a 44-year cohort study of 34,018 workers. American Journal of Epidemiology, 178(9):1424-33.
  6. Hnizdo E, Vallyathan V (2003) Chronic obstructive pulmonary disease due to occupational exposure to silica dust: a review of epidemiological and pathological evidence. Occupational and Environmental Medicine, 60(4):237-43.
  7. Ponti J, Sabbioni E, Munaro B, Broggi F, Marmorato P, Franchini F (2009) Genotoxicity and morphological transformation induced by cobalt nanoparticles and cobalt chloride: an in vitro study in Balb/3T3 mouse fibroblasts. Mutagenesis, 24(5):439-45.
  8. Anto J, Vermeire P, Vestbo J, Sunyer J (2001) Epidemiology of chronic obstructive pulmonary disease. European Respiratory Journal, 17(5):982-94.
  9. Halvani G, Zare M, Halvani A, Barkhordari A (2008) Evaluation and comparison of respiratory symptoms and lung capacities in tile and ceramic factory workers of Yazd. Archives of Industrial Hygiene and Toxicology, 59(3):197-204.
  10. Derakhshani E, Naghizadeh A, Shahabi H, Nazinejad M (2014)Evaluation of environmental and respirable dust in air of tile industry in South Khorasan. Archives of Hygiene Sciences, 3(3):85-90.
    1. Duarte SSS, Sousa ELd, Brito ED, Abreu RMSXd, Moreira MRC(2017) Occupational  health nurse in the prevention of silicosis: an integrative review. Revista de Pesquisa, Cuidado é Fundamental Online, 9(2):592-8
  11. Naghizadeh A, Mahvi AH, Jabbari H, Derakhshani E, Amini H (2011) Exposure assessment to dust and free silica for workers of Sangan iron ore mine in Khaf, Iran. Bulletin of Environmental Contamination and Toxicology, 87(5):531-8.
  12. Rastani MJ, Shahna FG, Bahrami AR, Hosseini S (2014) Evaluation of local exhaust ventilation efficiency to control emissions of fe2o3 dust in ambient air of the oxide screen unit in steel industry. Journal of Knowledge & Health, 9(4):68-75.
  13. Bahrami AR, Ghorbani F, Mahjub H, Golbabei F, Aliabadi M (2009) Application of traditional cyclone with spray scrubber to remove airborne silica particles emitted from stone-crushing factories. Industrial Health, 47(4):436-42.
  14. Shakibaei N (2014) Reducing workers’ exposures to chemicals and dust in nail salons using local exhaust ventilation systems. PhD diss, University of Washington, Seattle, WA.
  15. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health: NIOSH Report of Investigation, Dust control handbook for industrial minerals mining and processing by Cecala AB, Brien ADO, Schall J, Colinet JF, Fox WR, Franta RJ (DHHS ((NIOSH)) Publication No. 2012-112 ((RI 9689)), Jan 2012.
  16. Pagukuman BND, Leman AM, Yusof MZM ( 2013) The Efficacy of Local Exhaust Ventilation (LEVs) System Controls on Aerosols Exposures During Aluminium Cans Production. Applied Mechanics and Materials,;465:438.
  17. Carrer P, de Oliveira Fernandes E, Santos H, Hänninen O(2018) On the Development of Health-Based Ventilation Guidelines: Principles and Framework. International journal of environmental research and public health,15(7).
  18. Ondov JM, Ragaini RC, Biermann AH (1979) Elemental emissions from a coal-fired power plant. Comparison of a venturi wet scrubber system with a cold-side electrostatic precipitator. Environmental Science & Technology,13(5):598-607.
  19. Fredericks S, Saylor J (2016) Parametric investigation of two aerosol scavenging models in the inertial regime. Journal of Aerosol Science, 101:34-42.
  20. Mortezavi Mehrizi M, Kakooi H, Matin A, Hasheminegad N, Halvani G, Fallah H (2013)Designing, construction, assessment, and efficiency of local exhaust ventilation in controlling crystalline silica dust and particles, and formaldehyde in a foundry industry plant. Arhiv za Higijenu Rada i Toksikologiju, 64(1):123-31.
  21. Klein RC, King C, Castagna P (2014) Controlling formaldehyde exposures in an academic gross anatomy laboratory. Journal of Occupational and Environmental Hygiene, 11(3):127-32.
    1. A manual of recommended practice for design. USA, American Conference of Governmental Industrial Hygienists; 2013.
  22. Eller PM(1994) Method 7601: silica crystalline by VIS,   NIOSH manual of analytical methods: 4th Ed., Diane Publishing; 189-194 .
  23. Maciejewska A (2008) Occupational exposure assessment for crystalline silica dust, approach in Poland and worldwide, International Journal of Occupational Medicine and Environmental Health, 21(1):1-23.
  24. Shepherd S, Woskie S, Holcroft C, Ellenbecker M (2008) Reducing silica and dust exposures in construction during use of powered concrete-cutting hand tools efficacy of local exhaust ventilation on hammer drills. Journal of Occupational and Environmental Hygiene, 6(1):42-51.
  25. Cassidy A, Mannetje A, van Tongeren M, Field JK, Zaridze D, Szeszenia-Dabrowska N (2007)Occupational exposure to crystalline silica and risk of lung cancer: a multicenter case–control study in Europe. Epidemiology, 18(1):36-43.
  26. Yassin, A, Yebesi F, Tingle R (2005) Occupational exposure to crystalline silica dust in the United States, 1988-2003. Environmental Health Perspectives, 113(3): 255-60.
  27. Nor M (2014) Effectiveness of local exhaust ventilation systems in reducing personal exposure. Journal of Applied Sciences, 14(13):1365-71.
  28. Glinski M Dust emission and efficiency of local exhaust ventilation during cast iron grinding. International Journal of Occupational Safety and Ergonomics, 8(1):95-105 (2002).
    1. Ojima J (2007) Efficiency of a tool-mounted local exhaust ventilation system for controlling dust exposure during metal grinding operations. Industrial Health, 45(6),817-9.
    2. Shahna F, Bahrami AR, Farasati F (2012) Application of local exhaust ventilation system and integrated collectors for control of air pollutants in mining company. Industrial health, 50, 450-457.